Bodenguard Η-250 Primer
2-component, transparent, water based, epoxy primer
Two-component, water-based epoxy primer, specially designed for indoor or outdoor floors, roof terraces, etc. It is characterised by its impregnation into absorbent surfaces and its exceptionally high adhesion. It has a particularly mild odour and low emissions of volatile organic compounds classified as A+ and EMICODE EC2. It is CE labeled in accordance with ΕΝ 13813.
Advantages
- Exceptional adhesion
- Ideal Impregnation
- Low VOC
- Mild odor
Product information
Shades:TRANSPARENT
Packaging:4Kg (A: 3,33Kg & B: 0,67Kg), 10Kg (A: 8,33Kg & B: 1,67Kg)
Certifications / Evaluations
Technical Info
Technical Information
Application - Tools
Download the files
General Information
Two-component, water-based epoxy primer, specially designed for indoor or outdoor floors, roof terraces, etc. It is characterised by its impregnation into absorbent surfaces and its exceptionally high adhesion. It is used as an adhesion and stabilising primer for cementitious and absorbent surfaces, both prior to the application of BODENGUARD or FLOORSHIELD epoxy or polyurethane products, as well as a primer on bituminous membranes or roof terraces before applying products from the TOTAL PROOF series.
How to Use
The substrate to be coated must be clean, stable, solid, and free from standing water, rust, moisture (less than 4%), dust, oils, lime, tar, and any loose materials that could affect adhesion. For any repairs deemed necessary for the proper preparation of the substrate, the appropriate repair materials from KRAFT Paints should be used.
Concrete or absorbent surfaces: The quality of the concrete must be of a class equal to or higher than C20/25, and the cement content of the screed must be at least 350 kg/m3, with full curing for at least 28 days beforehand. Proper preparation and smoothing of the surface is essential, using mechanical methods such as sanding, milling, sandblasting, etc., and the ideal removal of dust.
The components A and B are packaged in containers with a predetermined mixing ratio. Component B is added completely into the container of component A. Mix the two components for about 1-2 minutes manually or with a low-speed drill , ensuring the mixture is homogeneous. Avoid excessive mixing to prevent air entrapment. Then, dilute approximately 5-10% by weight with water.Once properly prepared, apply one coat of the clear BODENGUARD H-250 PRIMER, water-based, after diluting 5% to 10% by weight with water. For highly absorbent surfaces, a second coat is recommended. After 24 hours, apply the final topcoat.
Store the product at temperatures between 5°C and 35°C away from direct sunlight and rain, for a maximum of 24 months from the date of production. Keep containers tightly closed when not in use.
