Bodenguard Η-200
2-component, water-based epoxy coating
Two-component, water-based epoxy coating, specifically designed for indoor mid-stress floors and surfaces exposed to water or chemicals. It is known for its high hardness, low odor, low emission of volatile organic compounds (VOC), and resistance to wear and chemicals, such as alkalis, oil fuels, etc. It is available in many shades and enhances the aesthetic of the space. It is CE certified according to standards EN 1504-2 & EN 13813 and is compliant to EN 1186 for direct food contact.
SEE THE FANDECKAdvantages
- Exceptional abrasion resistance
- Low odor
- Excellent finishing
- Chemical Resistance
Product information
Shades:WHITE, BASE P, BASE D
Packaging:4Kg (A: 3,33Kg & B: 0,67Kg), 12Kg (A: 10Kg & B: 2Kg)
Certifications / Evaluations
Technical Info
Technical Information
Application - Tools
Download the files
General Information
Two-component, water-based epoxy coating, specifically designed for indoor mid-stress floors and surfaces exposed to water or chemicals. It is known for its high hardness, low odor, low emission of volatile organic compounds (VOC), and resistance to wear and chemicals, such as alkalis, oil fuels, etc. It is available in many shades and enhances the aesthetic of the space. It is used as a protective and decorative coating for cementitious and metallic interior surfaces, suitable for parking spaces, industrial and commercial areas such as warehouses, workshops, laboratories, food industry, industrial refrigerators etc.
How to Use
The substrate to be coated must be clean, stable, solid, and free from standing water, rust, moisture (less than 4%), dust, oils, lime, tar, and any loose materials that could affect adhesion. For any repairs deemed necessary for the proper preparation of the substrate, the appropriate repair materials from KRAFT Paints should be used.
Concrete or absorbent surfaces: The quality of the concrete must be of a class equal to or higher than C20/25, and the cement content of the screed must be at least 350 kg/m3, with full curing for at least 28 days beforehand. Proper preparation and smoothing of the surface is essential, using mechanical methods such as sanding, milling, sandblasting, etc., and the ideal removal of dust. The repair of cracks or the filling of holes can be carried out using a mixture of BODENGUARD SL-550 PRIMER with BODENGUARD Q-500AS quartz sand, after the appropriate priming has been done.
Priming: Once properly prepared, apply one coat of the clear BODENGUARD H-250 PRIMER, water-based, after diluting up to 10% by weight with water, or the solvent-based clear primer BODENGUARD S-150 PRIMER diluted up to 10% by weight with NITRO 2000. After 24 hours, apply the final topcoat. For highly absorbent surfaces, apply the solvent-free BODENGUARD SL-550 PRIMER. After 24 hours, apply the topcoat.
Metallic or non-absorbent surfaces: Proper preparation is necessary using mechanical methods such as sanding with sandpaper or sandblasting, thorough removal of dust, rust, or loose areas, and degreasing with KRAFT NITRO 2000 thinner.
Priming: Once properly prepared, apply one or two coats of the anti-corrosive BODENGUARD AR-120 PRIMER, solvent-based, after diluting up to 10% by weight with KRAFT NITRO 2000. After 24 hours, apply the topcoat.
The components A and B are packaged in containers with a predetermined mixing ratio. Component B is added completely into the container of component A. Mix the two components for about 1-2 minutes manually or with a low-speed drill , ensuring the mixture is homogeneous. Avoid excessive mixing to prevent air entrapment. Then, dilute approximately 5-10% by weight with water.
BODENGUARD H-200 is applied in at least two coats, within 24 hours of the primer and after it has dried. It can be used diluted from 5% to 10% by weight with water and is applied with a roller, brush, or airless spray gun. Each subsequent coat is applied after the previous one has dried and is always within 24 hours.
Anti-slip surfaces: To achieve anti-slip surfaces, before applying the final coat of BODENGUARD H-200, add approximately 2% by weight of BODENGUARD PES-400AS polyester granules (maximum grain size 400μm) to the mixture and stir for about ½ – 1 minute, until fully homogeneous. Then, apply this final coat to the surface. Alternatively, use BODENGUARD Q-500AS quartz sand (maximum grain size 500μm) by broadcasting it onto the wet penultimate coat of BODENGUARD H-200 at a consumption rate of approximately 2.5 kg per square meter. Then, after 24 hours and once the coating is completely dry, remove the excess quartz sand that did not adhere to the surface, either manually or with a vacuum cleaner. Finally, apply the final coat of BODENGUARD H-200. 3
Store the product at temperatures between 5°C and 35°C away from direct sunlight and rain, for a maximum of 24 months from the date of production. Keep containers tightly closed when not in use.
