FixoTile Flex 30
Flexible, high-performance, polymer-modified, cement-based tile adhesive
FixoTile Ultra 20 is a high-performance, polymer-modified, cement based tile adhesive. Enriched with selected vinyl copolymer resins that offer enhanced adhesion and moisture resistance. The combination of modified cellulosics and appropriate graded aggregate granulometry ensures zero slip and extended open time. It is classified as type C2TE
tile adhesive according to EN 12004.
Advantages
- High adhesion & moisture resistance
- Great capacity of elastic deformation
- Ideal for large size tiles
- Compatible with flexible cementitious waterproofing membranes (EN 14891)
- Excellent workability & thixotropy
- Zero slip
- Extended open time
- Application thickness up to 15mm
- Indoor & outdoor usage
Product information
Shades:White
Packaging:5Kg,25Kg
Certifications / Evaluations
Technical Info
Technical Information
Application - Tools
Download the files
General Information
FixoTile Flex 30 is suitable for fixing absorbent and non-absorbent decorative tiles (e.g. granite, natural stone, glass tiles, porcellanato, klinker, ceramics, etc.) on floors or walls. Ideal for small & large
size tiles, and for areas where high flexibility, adhesion and moisture resistance are required, such as: roofs, balconies, swimming pools, underfloor heating, bathrooms, industrial areas, surfaces with intense &
heavy traffic (shopping centers, hotels, parking lots, schools, etc.).
It can be applied on a variety of substrates such as: concrete, cement mortars, renders & masonry mortars, painted walls, dry construction (gypsum boards, cement boards, etc.), flexible cementitious
waterproofing membranes, surfaces with existing and well anchored overlays of: tiles, marbles, mosaics. Compatible adhesive in tiling systems over flexible cementitious waterproofing membranes (according to EN 14891).
How to Use
To ensure good adhesion, substrate should be clean, solid, without large unevenness (≤15mm), free of dust, oil, lime, tar and loose elements.
Any new cementitious substrates (e.g. concrete, cement mortars, plasters, etc.) are ensured to be sufficiently cured for a period of at least 28 days, depending conditions.
- On absorbent surfaces, before application, soak with water, without forming stagnant water.
- On very absorbent surfaces (e.g. gypsum boards, cement boards, aerated concrete, etc.) it is recommended to apply the micromolecular substrate stabilization primer Eco Dur Aqua by KRAFT Paints.
- Apply the adhesive up to 15mm thickness on the substrate using a notched trowel of appropriate size. Then apply the tile with constant pressure to ensure good entire surface contact between adhesive & tile.
- On large tiles (>900 cm2) it is recommended to apply the adhesive all over the back side of each tile (“back-buttering” method) in order to achieve full bonding. Before application, ensure that tile surface is free of dust, otherwise clean thoroughly with water.
- Tools should be cleaned immediately after application with plenty of water while the material is still fresh or otherwise mechanically. Remove as much material as possible from tools before cleaning.
