FixoTile Ultra 20
High-performance, polymer-modified, cement-based tile adhesive
FixoTile Ultra 20 is a high-performance, polymer-modified, cement based tile adhesive. Enriched with selected vinyl copolymer resins that offer enhanced adhesion and moisture resistance. The combination of modified cellulosics and appropriate graded aggregate granulometry ensures zero slip and extended open time. It is classified as type C2TE
tile adhesive according to EN 12004.
Advantages
- High adhesion & moisture resistance
- Excellent workability & thixotropy
- Zero slip
- Extended open time
- Application thickness up to 10mm
- Indoor & outdoor usage
Product information
Shades:White
Packaging:5Kg,25Kg
Certifications / Evaluations
Technical Info
Technical Information
Application - Tools
Download the files
General Information
FixoTile Ultra 20 is suitable for fixing absorbent and non-absorbent decorative tiles (e.g. granite, natural stone, porcellanato, klinker,ceramics, etc.) on floors or walls. Ideal for small & large size tiles, and for areas where high adhesion and moisture resistance are required. It can be placed on a variety of substrates such as: concrete, cement mortars, renders & masonry mortars, painted walls, dry construction (gypsum boards, cement boards, etc.), surfaces with existing and well anchored overlays of: tiles, marbles, mosaics.
How to Use
To ensure good adhesion, substrate should be clean, solid, without large unevenness (≤10mm), free of dust, oil, lime, tar and loose elements.
Any new cementitious substrates (e.g. concrete, cement mortars, plasters, etc.) are ensured to be sufficiently cured for a period of at least 28 days, depending conditions.
- On absorbent surfaces, before application, soak with water, without forming stagnant water.
- On very absorbent surfaces (e.g. gypsum boards, cement boards, aerated concrete, etc.) it is recommended to apply the micromolecular substrate stabilization primer Eco Dur Aqua by KRAFT Paints.
- On non-absorbent surfaces (e.g. existing and well-anchored overlays of: very glossy tiles, marbles, mosaics) it is recommended to apply quartz adhesion primer Bonding Primer by KRAFT Paints and simultaneously reinforce the adhesive using appropriate resin in percentage according to technical requirements.
- Apply the adhesive up to 10mm thickness on the substrate using a notched trowel of appropriate size. Then apply the tile with constant pressure to ensure good entire surface contact between adhesive & tile.
- On large tiles (>900 cm2) it is recommended to apply the adhesive all over the back side of each tile (“back-buttering” method) in order to achieve full bonding. Before application, ensure that tile surface is free of dust, otherwise clean thoroughly with water.
- Tools should be cleaned immediately after application with plenty of water while the material is still fresh or otherwise mechanically. Remove as much material as possible from tools before cleaning.
