LevelWall One
Fiber-reinforced, water repellent, cement-based one-coat rendering mortar 1
LevelWall One is a fiber-reinforced, water-repellent, white, cementitious one coat render that replaces base and final render in thicknesses up to 2.5 cm/layer. It contains in its composition special, natural, active additives that inhibit the formation of shrinkage & dehydration cracks, at the same time offer thixotropy, high adhesion, excellent workability and mechanical strength making it suitable for base render replacement. The selected ratio of cement and graded aggregate granulometry offers a finish texture similar to that of traditional finishing renders. It contains natural hydraulic recycled binders (Recycled Green Technology). It is classified as render type OC CSIII Wc1 according to EN 998-1.
Advantages
- Exemplary workability
- Easy to apply
- Fast delivery of works (tight schedule)
- Simultaneous labor-material saving
- Finishing texture similar to traditional finishing renders
- Resistant to temperature changes
- Zero shrinkage & dehydration cracks
- Excellent adhesion to substrate
- Water vapor permeable
- Indoor and outdoor usage
Product information
Shades:White
Packaging:25kg
Certifications / Evaluations
Technical Info
Technical Information
Application - Tools
Download the files
General Information
LevelWall One is used as a one coat render replacing the two layers of traditional renders (base + final), saving time and facilitating application. It has a final finish result similar to traditional plasters. Suitable for large and small surfaces. Indoor and outdoor usage.
How to Use
LevelWall One is applied on walls, concrete surfaces or usual construction materials after applying a bonding (spatterdash/rough coat) as a primer first. On absorbent substrates, wet first with water and on non-absorbent substrates, apply Bonding Primer by KRAFT Paints. The application surface must be clean, solid, free of stagnant water, dust, oil, lime, tar and loose elements.
Putting the “guides” of rendering, apply the product by trowel, spatula or spraying machine in thickness up to 2.5cm. While the render is wet, level its surface using the proper mettalic spatula by applying it on to the “guides”. Remove the “guides” in order to avoid cracks. When the render starts its setting smooth the surface by using sponge float.
Tools should be cleaned immediately after application with plenty of water while the material is still fresh or otherwise mechanically. Remove as much material as possible from tools before cleaning.
