Total Proof™ FLEX
Elastomeric fiber-reinforced, liquid waterproofing membrane for flat roofs
Total Proof™ FLEX is a waterborne liquid waterproofing membrane with UV-crosslinking acrylic based resins. Its robust technology is enhanced with the 3D Fiber Technology providing excellent workability, cohesion in large film thickness, and very good mechanical properties. At the same time, the new technology formula offers excellent waterproofing, elasticity, and great resistance to weather conditions. It is a cool material since its excellent whiteness is evaluated by the National Technical University of Athens, contributing to energy savings, limiting air conditioning loads during the summer.
Advantages
- Ideal roof waterproofing
- Great elasticity
- Resistance to weather conditions
- Consistency in large thicknesses
- Very good mechanical strength
- Resistance to temperature variations
- Excellent reflectivity in solar radiation
- Ease of application
Product information
Shades:White
Packaging:4Kg,13Kg
Certifications / Evaluations
Technical Info
Technical Information
Application - Tools
Download the files
General Information
Total Proof FLEX is used as a cool material and roof waterproofing membrane. It has excellent adhesion to horizontal surfaces made of concrete, cement mortar, etc. while at the same time it seals cracks since it has excellent elasticity and resistance to intense temperature variations.
How to Use
Ensure even, clean, solid, free from standing water, dust, oil and loose elements substrate. For any
necessary repairs for the proper preparation of the substrate, select the appropriate repair materials from KRAFT Paints product line.
On absorbent substrates (e.g. concrete, cement, old tiles, etc.) prime with Total Proof Primer Aqua or alternatively with Eco Dur Aqua or Dur, by KRAFT Paints. On non-absorbent substrates (e.g. glossy tiles,
mosaics, asphalt, etc.) prime with the transparent Kraft Epoxy Floor Primer Aqua.
After proper preparation and priming of the substrate, Total Proof FLEX is applied in two layers crosswise by brush, roller, or airless gun.
Immediately after the application the tools must be cleaned with warm water and soap or a detergent solution. Remove as much material as possible from tools before cleaning.
